Acta Metallurgica Sinica杂志 SCI期刊 CSCD期刊 统计源期刊

收录情况：

期刊荣誉：

原始论文、短文快报、综合评述

Corrosion Behavior of Fe–Al Coatings Fabricated by Pack Aluminizing Method

Non-isothermal Dissolution Modelling of Sigma Phase in Duplex Stainless Steels

Observation of Bi Coarsening and Dissolution Behaviors in Melting Al–Bi Immiscible Alloy

Electrochemical Characteristics in Seawater for Cold Thermal Spray-Coated Al-Mg Alloy Layer

Analysis of Oxides Formed on the Surface of the Alloy 690 in Hydrogenated Supercritical Water

Characterization of the Grain Structures in Vacuum-Assist HighPressure Die Casting AM60B Alloy

Electrodeposited Ni-Based Coatings Subject to Nano-enhanced Lubricant and Composite Coating

Effects of Zr Content on the Microstructures and Tensile Properties of Ti-3Al-8V-6Cr-4Mo-xZr Alloys

Microstructure, Residual Strain and Stress Corrosion Cracking Behavior in 316L Heat-Affected Zone

Effect of Nb Content on Solidification Characteristics and Microsegregation in Cast Ti-48Al-xNb Alloys

Processing, Microstructure and Mechanical Properties of Ti6Al4V Particles-Reinforced Mg Matrix Composites

Thermal and Mechanical Properties of Graphene-Titanium Composites Synthesized by Microwave Sintering

Grain Refining Efficiency of SHS Al-Ti-B-C Master Alloy for Pure Aluminum and Its Effect on Mechanical Properties

Characteristics of the Structure and Properties of ZnSnO_3 Films by Varying the Magnetron Sputtering Parameters

A Comparison Study of Wear and Fretting Fatigue Behavior Between Cr-alloyed Layer and Cr-Ti Solid-solution Layer

Effect of Ambient Temperature on the Electrochemical Properties of La_4MgNi_(17.5)Co_(1.5) Hydrogen Storage Alloy

Fabrication of Bulk (Fe,Cr)_3Al/Al_2O_3 Intermetallic Matrix Nanocomposite Through Mechanical Alloying and Sintering

Effect of Nb and Mo on the Microstructure, Mechanical Properties and Ductility-Dip Cracking of Ni–Cr–Fe Weld Metals

Effects of W and Mo Additions on Wet-dry Acid Corrosion Behavior of Low-Alloy Steels Under Different O_2 Concentrations

Impact of Friction Stir Welding (FSW) Process Parameters on Thermal Modeling and Heat Generation of Aluminum Alloy Joints

Influence of Alloying Element Addition on Cu–Al–Ni High-Temperature Shape Memory Alloy without Second Phase Formation

Microstructure and Electrochemical Corrosion Behavior of Fe-Cr System Alloys as Substitutes for Ni-Based Brazing Filler Metal

A Composite Photoanode Based on P25/TiO_2 Nanotube Arrays/Flower-Like TiO_2for High-Efficiency Dye-Sensitized Solar Cells

Mechanical Properties and Microstructure Evolution of AA1100 Aluminum Sheet Processed by Accumulative Press Bonding Process

Effects of Substrate Crystallographic Orientations on Microstructure in Laser Surface-Melted Single-Crystal Superalloy:Theoretical Analysis

Microscopic Phase-Field Simulation for the Influence of Interatomic Potential on the Precipitation Process of Ni_(75)Al_(14)Mo_(11) Alloy

Electrochemical Properties of Tungsten-Alloying-Modified AISI 430 Stainless Steel as Bipolar Plates for PEMFCs used in Marine Environment

Influences of Hot-Isostatic-Pressing Temperature on the Microstructure, Tensile Properties and Tensile Fracture Mode of 2A12 Powder Compact

Comparative Study of the Magnetic Properties and Glass-Forming Ability of Fe-Based Bulk Metallic Glass with Minor Mn, Co, Ni, and Cu Additions

Microstructure and Properties of 7075Al Alloy Fabricated by Directly Combined of Spray Forming and Continuous Extrusion Forming under Different Atomization Gas Pressures

1、文章标题要简短，能概括中心思想，一般不超过20个汉字，必要时加副标题

2、正文应层次清楚，行文规范，方便阅读，字数一般以2500-8000字为宜，重要稿件可不受此限制

3、题目下面均应写作者姓名、单位名称、所在城市、邮编，多位作者分别列出上述信息

4、来稿必须附有100-300字的内容摘要和3－5个关键词

5、如文章获得基金项目资助，以[基金项目]作为标识，并注明基金项目名称和编号

6、正文中图表主要是文字难以表达清楚的内容，图表应设计合理，先后分别给出图表序号

7、来稿请注明姓名、性别、籍贯、出生年月、学历、职称、工作单位、联系电话、详细邮寄地址

8、编辑部有权对稿件进行修删，不同意请在稿件中声明

9、请勿一稿多投，发现一稿多投者，一切不良后果由作者承担

10、若不能被录用，恕不退稿，请作者自留底稿，不同意上述稿件处理方式的作者请转投他刊

11、本站并非Acta Metallurgica Sinica杂志社和Acta Metallurgica Sinica编辑部官方网站

地  址：72 Wenhua Road, Shenyang 110016, China

邮政编码：100711